| Customization: | Available |
|---|---|
| Feature: | Heat Insulation, High Voltage |
| Material: | Fiberglass Sleeving-Carbon Brush |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Description
The fiberglass sleeving for carbon brush is a alkali-free fiberglass braided sleeving coated with acrylic resin. It Possesses excellent flexibility an smooth cut. It can be used as a cover for the pigtail of a carbon brush.
Length:1000+20(-10)mm.
Appearance
The sleeving is not sticky. There are no lines and blots on the surface but small pellets may appear due to glass thread sleeving. It's colour is black or dark and no any clearly sign of discolouration
Heat resistance
When it cools down after being kept in a box with a constant temperature of 130±2'for 24 hours and is wound around the specific mandrel. It's coating will not crack.
Twist resistance
When the sleeving is cut and the new end is twisted ten times by fingers, the crosscut will not get loose by two inter-sections of braid.
Compatibility of wire's colour: The colour of the wire inserted inside the sleeving should be compatible with the colour it was uninserted.
Technical Data
|
Inner Diameter |
Wall Thickness |
||
|
Nominal |
Tolerance |
Nominal |
Tolerance |
|
1;1.5 |
+0.20 -0.10 |
0.30 |
±0.10 |
|
2;2.5 |
+0.30 -0.10 |
0.30 |
±0.10 |
|
3;3.5 |
+0.30 -0.10 |
0.50 |
±0.15 |
|
4;5;6 |
+0.40 -0.20 |
0.50 |
±0.15 |
|
7;8;9 |
+0.50 -0.30 |
0.60 |
±0.15 |
){kind=link}